Mounting & Rigging – MPS Film https://mpsfilm.com Camera Rental, Lighting & Studio Dallas - Fort Worth & Austin Fri, 24 Apr 2026 02:22:44 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.2 https://mpsfilm.com/wp-content/uploads/2021/06/MPS-Film-Favicon-White-70x70-1.jpg Mounting & Rigging – MPS Film https://mpsfilm.com 32 32 Matthews CAM Tank https://mpsfilm.com/product/matthews-cam-tank/ Tue, 31 Aug 2021 16:59:44 +0000 https://redfivellc.com/mpsfilm/?post_type=product&p=6556 Matthews CAM Tank is designed to accept all large format camera plates or direct mount to any large or medium format camera equipped with 3/8″-16 mounting holes. The CAM Tank was designed for extremely low shots, without taking away your ability to pan and tilt the camera. It is also used to achieve dutch angles when mounted to a fluid head, or shots designed to be pointed straight down off of a fluid head on a tripod or jib. The bottom of the plate has 17 strategically placed 3/8″-16 tapped holes spaced 1″ apart, complying with Motion Picture Industry Standards. The system is CNC machined out of 6061 T6 aluminum, stainless steel hardware. The pan bearing uses a machined polyoqymethyline, delrin disk, which self-lubricates and has an endurance rating 100x more than any plastic. The tilt system uses 4 premium NSK deep grooved ball bearings, made in Japan. Both pan and tilt functions come with brakes for lock off shots and camera safety.

Pan Range: 360 Degrees
Tilt Range: 30 degrees in each direction
Weight Capacity: 180lbs (82kg)
Minimum Camera Height: 4″ (101mm)
Length and Width: 10″x7″ (264mmx177mm)
Total Weight in Case: 15lbs (7kg) CAM Tank only is 10lbs (4.5kg)

]]> WALL SPREADER – 2X4 OR 2X6 https://mpsfilm.com/product/wall-spreader-2x4-or-2x6/ Tue, 31 Aug 2021 16:55:18 +0000 https://redfivellc.com/mpsfilm/?post_type=product&p=6081
  • Can be used in both vertical and horizontal positions
  • Paced at each end of either a 2 x 4 or 2 x 6 pre cut piece of lumber
  • Two piece system one
  • Receptacle for the lumber with a padded flat plate
  • Telescoping piece to insure a tight fit
    • ]]>         WALL BRACKET SET https://mpsfilm.com/product/wall-bracket-set/ Tue, 31 Aug 2021 16:55:18 +0000 https://redfivellc.com/mpsfilm/?post_type=product&p=6080 UMBRELLA https://mpsfilm.com/product/umbrella/ Tue, 31 Aug 2021 16:55:18 +0000 https://redfivellc.com/mpsfilm/?post_type=product&p=6079 TURTLE BASE https://mpsfilm.com/product/turtle-base/ Tue, 31 Aug 2021 16:55:18 +0000 https://redfivellc.com/mpsfilm/?post_type=product&p=6078 Max Ht: 126.5″ (321cm)
    Min Ht: 53″ (135cm)
    Capacity: 22lbs. (10kg)
    Weight: 16lbs (7.2kg)
    Footprint: 27.5″ (70cm)
    Folded Base: 21″ (54cm)

    ]]>         TROMBONE https://mpsfilm.com/product/trombone/ Tue, 31 Aug 2021 16:55:18 +0000 https://redfivellc.com/mpsfilm/?post_type=product&p=6077 T-BONE https://mpsfilm.com/product/t-bone/ Tue, 31 Aug 2021 16:55:18 +0000 https://redfivellc.com/mpsfilm/?post_type=product&p=6076 The T-Bone, also called T-Bone Turtle, is the ultimate ‘Pigeon.’ Made of heavy-guage steel, with supported 1-1/8′ Posi-V-Lock receiver, this piece of equipment is usually nailed or screwed to the studio floor for mounting larger fixtures such as Seniors or 10Ks.

    Weight: 10lbs

    ]]>         SUPER (POWER) GRIP https://mpsfilm.com/product/super-power-grip/ Tue, 31 Aug 2021 16:55:18 +0000 https://redfivellc.com/mpsfilm/?post_type=product&p=6075 SUCTION CUPS – SINGLE https://mpsfilm.com/product/suction-cups-single/ Tue, 31 Aug 2021 16:55:18 +0000 https://redfivellc.com/mpsfilm/?post_type=product&p=6074 SPRING CLAMP #3 (6IN) https://mpsfilm.com/product/spring-clamp-3-6in/ Tue, 31 Aug 2021 16:55:17 +0000 https://redfivellc.com/mpsfilm/?post_type=product&p=6072 SINGLE MOLE VAC https://mpsfilm.com/product/single-mole-vac/ Tue, 31 Aug 2021 16:55:17 +0000 https://redfivellc.com/mpsfilm/?post_type=product&p=6066 SPEED RAIL https://mpsfilm.com/product/speed-rail/ Tue, 31 Aug 2021 16:55:17 +0000 https://redfivellc.com/mpsfilm/?post_type=product&p=6067